ASTM B705 Inconel 625 Welded Pipe | UNS N06625

ASTM B705 Inconel 625 Welded Pipe | UNS N06625

Technical Specifications

Item Specification
Standard ASTM B705 (dimensions and tolerances per ASTM B775)
Alloy / UNS Inconel 625 / N06625
Grade Grade 1 (annealed); Grade 2 (solution annealed ≥ 1093 °C)
Class Class 1 or Class 2 NDT
OD [12.7–610 mm (1/2"–24")]
WT [Sch 5S–Sch 40S; Sch 80S on request]
Length [Random, fixed, or cut-to-length]
Ends Plain end, beveled end
Condition Annealed, oxide removed, or bright annealed
Inspection PMI, flattening, bend test, hydro, NDT, third-party
Certificate EN 10204 3.1
DESCRIPTION

PETROL STEEL CO., LTD. supplies ASTM B705 Inconel 625 welded pipe in UNS N06625, delivered in the annealed or solution-annealed condition for general corrosion service. The pipe is made from flat-rolled alloy by an automatic welding process with no filler metal, then cold-worked and annealed so the weld zone and base metal behave as one microstructure. Typical supply covers outside diameters from 12.7 mm to 610 mm (1/2″ to 24″) in wall thicknesses from Sch 5S to Sch 40S, with heavier walls on request. Every shipment includes an EN 10204 3.1 mm test certificate, and PMI is available on every length. If you are comparing welded and seamless Alloy 625 for a corrosion-resistant piping package, this page explains what B705 actually guarantees and where welded pipe saves money.

B705 is narrower than most buyers expect. It covers pipe in schedule sizes, and the dimensional tolerances come from ASTM B775, which B705 calls up as the general requirement. Two grades matter for N06625. Grade 1 is supplied annealed. Grade 2 is solution-annealed at a minimum of 1093°C, with an optional stabilization anneal at a minimum of 982°C to improve resistance to sensitization. If the purchase order names neither, the standard defaults to Grade 1. That default catches buyers out regularly, so we confirm the grade in writing before production. The two classes describe testing: Class 1 pipe gets one non-destructive test per piece; Class 2 gets a leak test plus an electric test.

Chemistry is controlled by lot. N06625 requires nickel at 58.0% minimum, chromium 20.0–23.0%, molybdenum 8.0–10.0%, and niobium plus tantalum 3.15–4.15%, with iron held to 5.0% maximum and carbon to 0.10% maximum. Mechanical minimums differ by grade. Grade 1 delivers 827 MPa (120 ksi) tensile, 414 MPa (60 ksi) yield, and 30% elongation. Grade 2 delivers 690 MPa (100 ksi) tensile, 276 MPa (40 ksi) yield, and 30% elongation. In practice, Grade 1 suits buyers who want a strength margin for pressure design, while Grade 2 suits hot service where sensitization is a concern. We list the heat’s actual results on the MTC, not just the minimums.

‘Welded’ or ‘seamless’ is a question we answer on almost every RFQ. Seamless N06625 pipe, which we also supply, remains the usual choice for small bores and the most severe pressure duty. Welded pipe is usually the better value from about 2″ upward for process piping, ducting, heat-exchanger shells, scrubber lines, and flare-adjacent systems. Because the B705 pipe is welded without filler and then worked and annealed, buyers get a consistent wall at a shorter lead time and lower cost. Where a project spec insists on seamless, we say so up front rather than force a fit. Our Inconel 625 seamless pipe page covers that route, and our Inconel 625 butt weld fittings (ASTM B366 WPNCMC) page covers the fittings, so one supplier can cover both pipe and fittings under matching material certificates.

Alloy 625 earns its price where chlorides, acids, and temperature meet. Our welded pipe goes into offshore topsides and seawater-exposed systems, chemical and petrochemical process lines, flue gas desulfurization units, pulp and paper bleaching, waste-to-energy plants, and power-plant heat recovery. Orders come from EPC contractors and distributors across the Middle East, Southeast Asia, Europe, Africa, and the Americas. Typical RFQs call for a mix of sizes in modest quantities, with fabrication dates fixed by the project schedule. That pattern suits us, because we plan production runs around your delivery window rather than a rigid minimum.

Quality control follows the standard and then goes further. For each lot, we verify chemistry, tensile and yield properties, the flattening test (flattened to five times the wall thickness without cracking, weld at 90° to the load), and, where specified, the transverse guided bend test. Class 1 or Class 2 non-destructive testing is selected on the PO, and we report which method was used. PMI is done piece by piece before marking; hydrostatic testing is available to your pressure; and each piece is marked with the grade, as B751 requires, with the heat number and size added. Third-party inspection by SGS, BV, or TÜV can be witnessed at our works, and the purchase order must state which tests you want witnessed, exactly as B705 requires.

Documentation and packing determine whether the pipe passes the receiving site. We issue an EN 10204 3.1 MTC referencing ASTM B705, the UNS number, grade, class, and heat number, plus the NDT report and PMI record. Alloy pipe is wrapped to prevent carbon steel contamination, fitted with end caps, and packed in plywood cases or bundles with non-metallic separators. Markings are checked against the packing list before loading. Lead time depends on size and quantity, and we quote [30–45 days] for typical production orders, shorter when the heat is in stock. Please send OD, wall thickness, grade, class, length, and quantity so we can reply with a price and schedule, usually within one working day.

PETROL STEEL CO., LTD is an export supplier of pipe, fittings, and nickel-alloy products for oil and gas, energy, and infrastructure projects. Our team has handled corrosion-resistant alloy orders for more than a decade and knows which documents EPC procurement and inspection departments will ask for and in what order. We support buyers from inquiry through inspection and shipping, and we are transparent about stock, made-to-order items, and what a standard does not cover. Send OD, WT, grade & quantity, and our engineers will return a quotation with testing scope, packing, and delivery terms.

Technical Specifications

Item Specification
Standard ASTM B705 (dimensions and tolerances per ASTM B775)
Alloy / UNS Inconel 625 / N06625
Grade Grade 1 (annealed); Grade 2 (solution annealed ≥ 1093 °C)
Class Class 1 or Class 2 NDT
OD [12.7–610 mm (1/2″–24″)]
WT [Sch 5S–Sch 40S; Sch 80S on request]
Length [Random, fixed, or cut-to-length]
Ends Plain end, beveled end
Condition Annealed, oxide removed, or bright annealed
Inspection PMI, flattening, bend test, hydro, NDT, third-party
Certificate EN 10204 3.1

Chemistry (%, N06625): Ni 58.0 min · Cr 20.0–23.0 · Fe 5.0 max · Mo 8.0–10.0 · Nb+ Ta 3.15–4.15 · C 0.10 max · Mn 0.50 max · Si 0.5 max · P 0.015 max · S 0.015 max · Al 0.4 max · Ti 0.40 max · Co 1.0 max (if determined)

Grade Tensile min Yield 0.2% min Elongation min
Grade 1 827 MPa (120 ksi) 414 MPa (60 ksi) 30%
Grade 2 690 MPa (100 ksi) 276 MPa (40 ksi) 30%

FAQ

  1. What does ASTM B705 cover? Welded N06625, N06219, and N08825 pipe in the annealed condition for general corrosion service, in schedule sizes.
  2. Grade 1 or Grade 2 for N06625? Grade 1 is annealed and has higher strength. Grade 2 is solution annealed for better resistance to sensitization. If the PO says nothing, Grade 1 is supplied.
  3. Is the B705 welded pipe made with filler metal? No. It is welded automatically without filler, then cold-worked and annealed.
  4. What is the difference between Class 1 and Class 2? Class 1 gets one NDT (hydrostatic, pneumatic, eddy current, or ultrasonic). Class 2 gets a leak test plus an electric test.
  5. Which dimension standard applies? ASTM B775, with general requirements per B751 for marking and tubes.
  6. Which documents do you provide? EN 10204 3.1 MTC, NDT report, PMI record, and third-party inspection by SGS, BV, or TÜV on request.
  7. Can welded Alloy 625 replace seamless Alloy 625? For many process-piping duties above about 2 inches, yes, if the project spec allows it. Always check the spec.
  8. What do you need for a quotation? OD, WT, grade, class, length, quantity, and destination port.

INQUIRY US

Product Categories

Need a Quote?

Send OD, WT, grade & quantity — get ex-factory pricing within 24 hrs.