PETROL STEEL CO., LTD. supplies Hastelloy C276 seamless pipe to ASTM B622 in UNS N10276, delivered solution annealed and descaled for corrosive process service. Our standard seamless range runs from NPS 1/4″ to 3″ (OD 13.72 to 88.9 mm) in Schedule 10, 40, and 80 walls, with other wall thicknesses by agreement. Each shipment is accompanied by an EN 10204 3.1 mm test certificate, and PMI is available on every length. If you are specifying small-bore piping for a chemical plant, scrubber, or acid-handling skid, this page sets out what B622 guarantees, what it leaves to the purchase order, and what we check before the pipe leaves our works.
B622 covers seamless pipe and tube in a long list of nickel and nickel-cobalt alloys, and N10276 is one of them. The standard treats pipe as a seamless tube in standard pipe sizes, inheriting general requirements from ASTM B829. One limit surprises many buyers: B622 applies only to products up to and including a 3.5 in. (88.9 mm) outside diameter. Anything larger needs a different route, usually welded pipe, and we will say so at the quotation stage instead of stretching a standard past its scope. Plain ends, cut and deburred, are the default unless you order otherwise.
The chemistry of N10276 is what you are paying for. B622 sets nickel as the remainder, chromium at 14.5–16.5%, molybdenum at 15.0–17.0%, tungsten at 3.0–4.5%, and iron at 4.0–7.0%. Carbon is held to 0.010% maximum and silicon to 0.08% maximum, which keeps grain-boundary carbide precipitation low after welding. Cobalt is limited to 2.5%, manganese to 1.0%, vanadium to 0.35%, phosphorus to 0.04%, and sulfur to 0.03%. Room-temperature mechanical minimums are 690 MPa (100 ksi) tensile, 283 MPa (41 ksi) yield, and 40% elongation. The standard gives density as 8.87 g/cm³, which we use for weight calculations on your packing list.
Why do buyers choose C276 over cheaper stainless or duplex? C276 holds up where oxidizing and reducing media meet. Typical duties include wet chlorine and hypochlorite, ferric and cupric chlorides, hot sulfuric and hydrochloric acid mixtures, acid gas and flue gas desulfurization, and organic processes with chloride contamination. Pitting and crevice resistance in these media is the reason it appears on so many datasheets, but no alloy fits every duty. We encourage buyers to share the medium, temperature, and concentration so we can say honestly whether C276 is the right call or whether another nickel alloy fits better.
Seamless or welded is a question on nearly every RFQ. For NPS 3″ and below, seamless is the usual choice because it avoids the weld seam altogether, and that matters for instrument lines, sampling points, injection quills, and small heat-exchanger runs. Above that size, our Hastelloy C276 welded pipe (UNS N10276) is the practical option, and we supply matching butt-weld fittings, pipe flanges, and round bars from the same material family. Ordering pipe, fittings, flanges, and bars together keeps heat traceability simple and shortens on-site receiving inspection.
Our nickel-alloy pipe goes to chemical and petrochemical plants, flue gas desulfurization units, pharmaceutical and fine-chemical lines, pulp and paper bleaching, offshore and subsea chemical injection, and waste-to-energy facilities. Buyers are mainly EPC contractors, fabricators, and distributors in the Middle East, Southeast Asia, Europe, Africa, and the Americas. Typical RFQs are mixed lists of small sizes in modest quantities against a fixed shutdown or commissioning date. We plan production around your delivery window instead of forcing a large minimum, and we will tell you plainly which items are in stock.
Quality control follows the standard and then goes further. B622 requires every pipe to pass either a hydrostatic test or a nondestructive electric test, and we indicate on the MTC which test was used. Chemistry and tension tests are performed once per lot, with tension specimens taken after final heat treatment, and failed lots can be retested as the standard allows. B622-26 now makes the manufacturer’s certification mandatory, so every order ships with a report of test results. Beyond the standard, we offer PMI on each piece, UT or RT on request, extended hydrotest to your pressure within the B829 fiber-stress limit, and third-party inspection by SGS, BV, or TÜV witnessed at our works.
Packing and paperwork decide whether the pipe passes the receiving site. Nickel alloy pipe is wrapped to prevent carbon steel contamination, fitted with end caps, and packed in plywood cases with non-metallic separators; markings are checked against the packing list before loading. We quote [30–45 days] for typical production orders, shorter when the heat is in stock. PETROL STEEL CO., LTD is an export supplier of pipe, fittings, and nickel-alloy products for oil and gas, energy, and process projects, and our team knows which documents EPC purchasing and inspection departments ask for, and in what order. Send OD, WT, grade & quantity, and our engineers will return a quotation with testing scope, packing, and delivery terms.
Technical Specifications
| Item | Specification |
|---|---|
| Standard | ASTM B622 (ASME SB-622); general requirements ASTM B829 |
| Alloy / UNS | Hastelloy C276 / N10276 |
| Condition | Solution annealed and descaled (bright annealed: descaling not required) |
| OD | 13.72–88.9 mm (NPS 1/4″–3″) |
| WT | Sch 10: 1.65–3.05 mm · Sch 40: 2.24–5.49 mm · Sch 80: 3.20–7.62 mm (per B622 Appendix X2) |
| Length | [Random 5.8–6 m, fixed or cut-to-length] |
| Ends | Plain end, cut and deburred; beveled on request |
| Finish | Descaled (pickled) or bright annealed |
| Testing | Hydrostatic or electric test; PMI; UT/RT optional |
| Certificate | EN 10204 3.1 with the ASTM B622 test report |
Chemistry (%, N10276): Ni remainder · Cr 14.5–16.5 · Mo 15.0–17.0 · Fe 4.0–7.0 · W 3.0–4.5 · C 0.010 max · Si 0.08 max · Co 2.5 max · Mn 1.0 max · V 0.35 max · P 0.04 max · S 0.03 max
| Property | Minimum |
|---|---|
| Tensile strength | 690 MPa (100 ksi) |
| Yield strength, 0.2% offset | 283 MPa (41 ksi) |
| Elongation in 2 in. or 4D | 40% |
| Density | 8.87 g/cm³ (0.321 lb/in. ³) |
FAQ
- What does ASTM B622 cover? Seamless pipe and tube in nickel and nickel-cobalt alloys, including UNS N10276, for sizes up to and including 3.5 in. (88.9 mm) OD.
- What is the delivery condition? Solution annealed and descaled. If atmosphere control is used (bright annealing), descaling is not needed.
- What are the minimum mechanical properties of N10276? 690 MPa tensile, 283 MPa yield, and 40% elongation.
- Can you supply C276 seamless pipe above 3 inches? Not under B622. Larger sizes are supplied as welded pipe; ask us for the right standard.
- What testing is required? Each piece gets a hydrostatic test or a non-destructive electrical test, plus chemistry and tension tests per lot.
- Which documents do you provide? EN 10204 3.1 MTC with a B622 test report, PMI record, and third-party inspection by SGS, BV, or TÜV on request.
- Is C276 the same as Alloy 625? No. C276 (N10276) is a nickel-chromium-molybdenum-tungsten alloy with very low carbon. 625 (N06625) contains niobium and is selected differently, so check your medium and temperature.
- What do you need for a quotation? Please provide the following information for your quotation: OD, wall thickness or schedule, length, quantity, test requirements, and destination port.

