ASTM B622 Alloy C-22 Seamless Pipe (UNS N06022)

ASTM B622 Alloy C-22 Seamless Pipe (UNS N06022)

Quick specification table

Item Detail
Product standard ASTM B622 (seamless nickel and nickel-cobalt alloy pipe and tube)
General requirements ASTM B829
Alloy / UNS Alloy C-22 / UNS N06022 (EN: NiCr21Mo14W, 2.4602)
Form Seamless pipe and tube
OD / NPS [ ] mm / NPS [ ]
Wall thickness [ ] mm, schedule [ ]
Length Random or cut-to-length [ ] m
Condition Annealed
Ends Plain end or beveled end
Surface Pickled or bright-annealed [confirm]
Coating None as standard
Testing Hydrostatic or NDT per B829; tensile; PMI; UT on request
Certification EN 10204 3.1 MTC
Sour service ISO 15156 requirements confirmed per order
MOQ / lead time [ ] kg / [ ] weeks, confirmed per RFQ
DESCRIPTION

Alloy C-22 (UNS N06022) is a nickel-chromium-molybdenum-tungsten alloy designed for wet-process service where oxidizing and reducing media meet. ASTM B622 covers it as seamless pipe and tube, and ASTM B829 sets the general requirements for dimensions, testing, and marking. Petrol Steel Co., Ltd. supplies N06022 seamless pipe in NPS [ ]–[ ] and wall thickness [ ]–[ ] mm, with EN 10204 3.1 certification and optional third-party inspection.

Quick specification table

Item Detail
Product standard ASTM B622 (seamless nickel and nickel-cobalt alloy pipe and tube)
General requirements ASTM B829
Alloy / UNS Alloy C-22 / UNS N06022 (EN: NiCr21Mo14W, 2.4602)
Form Seamless pipe and tube
OD / NPS [ ] mm / NPS [ ]
Wall thickness [ ] mm, schedule [ ]
Length Random or cut-to-length [ ] m
Condition Annealed
Ends Plain end or beveled end
Surface Pickled or bright-annealed [confirm]
Coating None as standard
Testing Hydrostatic or NDT per B829; tensile; PMI; UT on request
Certification EN 10204 3.1 MTC
Sour service ISO 15156 requirements confirmed per order
MOQ / lead time [ ] kg / [ ] weeks, confirmed per RFQ

When Alloy C-22 Is the Right Pipe, and When It Is Not

Buyers rarely ask for C-22 because of a datasheet. They ask because a line failed. A typical story is a process stream that oxidizes one week and reduces the next, with chlorides that attack the stainless steel pipe in the crevice under a flange. Alloy C-22 was designed for that kind of mixed duty and is widely used in chemical processing, flue gas cleaning, pulp and paper, pharmaceuticals, and some sour oil and gas services. It is not a universal answer. For milder duties, Alloy 825 seamless pipe, ASTM B423, is often more economical. For seawater and higher-strength needs, consider Alloy 625 seamless pipe, ASTM B444. Send us the medium, temperature, chloride level, and pH, and we will recommend a grade even if it is not C-22.

How B622, B829, and ISO 15156 Fit Together

These three documents get mixed up in inquiries, so it helps to separate them. ASTM B622 is the product specification. It defines the alloys covered, their chemistry, mechanical properties, and heat-treated condition. ASTM B829 is the general requirements document. It governs how the pipe is dimensioned, tested, marked, and certified, and B622 refers to it. ISO 15156, also known as NACE MR0175, is different. It is not a product standard. It is a materials selection standard for environments containing hydrogen sulfide. It does not say that a pipe “complies” by name alone. It sets conditions on material state, hardness, and environment. Your purchase order should therefore name B622 and B829 for the product, and state the ISO 15156 conditions for the service.

Chemistry and Mechanical Properties

Typical limits for UNS N06022 in weight percent are chromium 20.0–22.5, molybdenum 12.5–14.5, tungsten 2.5–3.5, iron 2.0–6.0, cobalt 2.5 max, vanadium 0.35 max, carbon 0.015 max, manganese 0.50 max, silicon 0.08 max, phosphorus 0.02 max, and sulfur 0.02 max, with nickel as the balance. The very low carbon and silicon limits keep carbides and other phases from forming at grain boundaries, which is why the alloy tolerates welding in most services. In the annealed condition, the minimum tensile strength is 690 MPa (100 ksi), the minimum yield strength at 0.2% offset is 310 MPa (45 ksi), and the minimum elongation is 45%. These values must be confirmed against the edition of B622 named in your order.

Element Limit (wt.%)
Ni Balance
Cr 20.0–22.5
Mo 12.5–14.5
W 2.5–3.5
Fe 2.0–6.0
Co 2.5 max
V 0.35 max
C 0.015 max
Mn 0.50 max
Si 0.08 max
P / S 0.02 max each

 

Property (annealed) Minimum
Tensile strength 690 MPa (100 ksi)
Yield strength (0.2%) 310 MPa (45 ksi)
Elongation 45%

Sizes, Wall Thickness, and Length

Seamless pipe is normally ordered by nominal pipe size and schedule, with the tolerances in B829 applying to outside diameter, wall thickness, and length. Seamless pipe in nickel alloys is generally supplied in NPS ½ to NPS [ ] and in schedules from 10S to [ ]. Special wall thicknesses can be made to order [confirm]. The standard specifies permissible variations in diameter, wall thickness, and straightness. We quote against your drawing, and we confirm what the mill can hold before you place the order. Lengths are random or cut to length. Tell us the length your spools or skids need, because short cuts add scrap and long ones add handling risk. [Fill in your size range.]

Sour Service and ISO 15156: What Your Order Must State

This is where inquiries most often go wrong. A request that says only “Alloy C-22, sour service” leaves the supplier guessing. ISO 15156 lists solid-solution nickel-based alloys of this type for H₂S environments, but within limits on temperature, H₂S partial pressure, chloride concentration, pH, and the material’s metallurgical condition. Put the real service conditions in the inquiry: maximum temperature, H₂S partial pressure, chloride content, pH, and any elemental sulfur. State the material condition required and any hardness limit. We then confirm what we can supply and what documents we can give, and we will not put a compliance statement on a certificate that the material has not earned. If your project needs extra tests such as hardness mapping, we agree on them before the order is placed.

Testing, Traceability, and Documents

Each pipe is tested hydrostatically or by a nondestructive electric test, as B829 requires, and the manufacturer’s certification must state that the pipe was made, sampled, tested, and inspected in accordance with the specification. In addition, we supply an EN 10204 3.1 certificate with heat number, chemistry, and tensile results; PMI on each length or bundle; dimensional and visual inspection; and ultrasonic testing where the size and the agreement allow. Intergranular corrosion testing, for example, to ASTM G28, is available on request. If your owner or EPC contractor requires independent verification, we arrange inspection by SGS, BV, or TÜV, including witnessing and pre-shipment release. Agree to hold points and acceptance criteria before the order is confirmed, because changing them after production is slow and expensive.

One Source for Matching Pipe, Fittings, and Flanges

A corrosion-resistant line fails at its weakest component. We therefore supply seamless pipe, welded pipe, fittings, flanges, and bars in the same nickel alloys, so the whole spool carries matching certificates and heat traceability. This helps during document review because the MTCs, PMI records, and test reports align with the isometric and the material take-off. For welded systems, use a matching-composition filler metal and follow the qualified procedure for your project. If you need the pipe cut, beveled, or prepared to a drawing, send it with the inquiry.

Packing, Marking, and Export Documents

Pipes are marked with the UNS number, heat number, specification, size, and condition, and each length is protected with end caps and wrapped to keep iron contamination and moisture away from the surface. They are bundled and crated in export wooden cases, with a packing list, certificate of origin, and any third-party release papers your destination requires. A nickel alloy pipe should never be stored touching carbon steel, and we pack it accordingly. Photos of the packing and PMI are available before shipment.

How to Request a Quote

Petrol Steel Co., Ltd. supplies nickel alloy pipes, fittings, flanges, and bars to EPC contractors, fabricators, stockists, and trading partners worldwide. To start, send OD, WT, grade, and quantity, plus the medium, design temperature, chloride level, any ISO 15156 conditions, the code or standard you work to, and any inspection requirements. We reply with a clear offer, a confirmed MOQ, and a realistic lead time. If Alloy C-22 is not the right fit, we will say so.

Case example (optional): replace this line with one real project, for example, “N06022 seamless pipe for [application] delivered to [region], with SGS witnessing.” Delete it if you have no real case.

Related reading

RFQ block

Send OD, WT, grade & quantity. Also helpful: medium design temperature, chloride level, ISO 15156 conditions, B622/B829 edition, inspection requirement, destination port.
RFQ form

Email: sales@petrolsteel.com

WhatsApp / WeChat: +8615900357871

4. FAQ – Top 8

  1. What does ASTM B622 cover? Seamless nickel and nickel-cobalt alloy pipe and tube, including UNS N06022.
  2. What is ASTM B829? The general requirements document for nickel alloy seamless pipe and tube. It covers dimensions, tolerances, testing, marking, and certification.
  3. Can the N06022 pipe be supplied for ISO 15156 sour service? Often yes, within the standard’s limits on temperature, H₂S partial pressure, chloride, pH, and material condition. State the service conditions in order.
  4. What sizes and wall thicknesses do you supply? NPS [ ]–[ ], wall thickness [ ]–[ ] mm. Other sizes are subject to feasibility.
  5. What tests and certificates come with the pipe? EN 10204 3.1 MTC, hydrostatic or NDT, PMI, UT, where agreed, and SGS/BV/TÜV inspection on request.
  6. Alloy C-22 or C276: Which should I choose? It depends on the medium, temperature, and chloride level. Send them, and we’ll recommend one.
  7. Seamless or welded pipe? Seamless suits higher pressures and critical lines. Welded pipe is often chosen for large diameters and cost.
  8. MOQ, lead time, and what do you need for a quote? Confirmed per RFQ [state your figures]. Send OD, WT, grade, quantity, and service conditions.

INQUIRY US

Product Categories

Need a Quote?

Send OD, WT, grade & quantity — get ex-factory pricing within 24 hrs.