Alloy 625 Forged Flanges to ASTM B564 — Grade 1 or Grade 2, Made for ASME B16.5 | UNS N06625

Alloy 625 Forged Flanges to ASTM B564 — Grade 1 or Grade 2, Made for ASME B16.5 | UNS N06625

Specification Table 

Item Detail
Standard ASTM B564-25 / ASME SB-564 (state edition on PO)
Alloy Alloy 625 (Inconel 625), UNS N06625, W.Nr. 2.4856
Product Forged flanges: weld neck, slip-on, blind, lap joint, socket weld
Grade Grade 1 annealed (default); Grade 2 solution annealed
Dimensional standard ASME B16.5 (NPS ½–24), B16.47 for larger sizes [confirm range]
Pressure class 150 to 2500 [confirm]
Facing RF, FF, RTJ
Surface Machined; pickled on request
Documents EN 10204 3.1 MTC: manufacturer's certification and test report when specified
Inspection PMI, dimensional, visual; UT / PT / MT per PO; SGS / BV / TÜV
Marking Material, B564, heat number, condition
DESCRIPTION

Alloy 625 flange to ASTM B564 is a forged nickel-chromium-molybdenum-niobium flange, supplied under UNS N06625 for seawater, sour gas, chemicals, and high-temperature pipework. PETROL STEEL CO., LTD. supplies weld neck, slip-on, blind, lap-joint, and socket-weld flanges in this alloy, forged and heat-treated to B564 (ASME SB-564) and dimensioned to ASME B16.5 [confirm NPS and class range]. Every flange is heat-traceable, ships with an EN 10204 3.1 certificate, and can be inspected by SGS, BV, or TÜV before dispatch.

The first thing to understand is what B564 covers. It is a nickel alloy forging specification. It sets what the metal must be: chemical limits, mechanical properties, heat treatment, lot sampling, certification, and marking. It does not set what the flange looks like. Section 6 leaves dimensions and tolerances to the forging sketch or drawing, so the bolt circle, facing, hub, and bore come from ASME B16.5 for NPS ½ to 24 and from B16.47 for larger sizes. A purchase order that names only “B564” is incomplete; a good one names the material standard, the dimensional standard, the class, and the facing.

The chemistry is what earns Alloy 625 its place. B564 limits UNS N06625 to nickel 58.0% minimum, chromium 20.0–23.0%, molybdenum 8.0–10.0%, and niobium (columbium) 3.15–4.15%, with iron held to 5.0% maximum, carbon to 0.10% maximum, and titanium and aluminum to 0.4% each. Molybdenum and niobium give it strength without a precipitation treatment and resistance to pitting and crevice corrosion in chloride. Nickel keeps it free of chloride stress corrosion cracking. That combination is why the alloy is chosen for seawater cooling, flue-gas scrubbers, sour production, and chemical process lines where stainless steel or duplex fails.

The decision that matters most on an order is the grade. B564 supplies N06625 in two heat-treated conditions. Grade 1 is annealed at 1600°F (871°C) minimum and is normally used up to 1100°F (593°C). Grade 2 is solution annealed at 2000°F (1093°C) minimum, with or without a stabilization anneal at 1800°F (982°C) minimum, and is normally used above 1100°F where creep and rupture resistance are required. Unless the purchaser says otherwise, Grade 1 is supplied. We always ask the service temperature before quoting, because a flange ordered as default Grade 1 for a hot line is a mistake that only shows up in the field.

The mechanical limits differ by grade and by section size. For Grade 1, up to 4 in. (102 mm) section, the standard requires a tensile strength of 120 ksi (827 MPa), a yield of 60 ksi (414 MPa), and 30% elongation; from over 4 in. to 10 in. (254 mm), the minimums fall to 110 ksi (758 MPa), 50 ksi (345 MPa), and 25%. For Grade 2, all sizes, the minimums are 100 ksi (690 MPa) tensile, 40 ksi (276 MPa) yield, and 30% elongation. The tension specimen is taken from the forging or a test prolongation, positioned midway between the center and the surface, and aligned with the direction of greatest metal flow. Large, heavy hubs, therefore, need a test location agreed upon in advance.

Quality inspection on commercial B564 orders is shaped by the purchase order, and we say so openly. A lot for chemistry is one heat. A lot for mechanical properties is all material from the same heat, size, finish, and condition processed at one time, with one test per lot. When the PO calls for it, the manufacturer must furnish a certification and a report of test results. Each flange is marked with the material name, specification number, heat number, and condition. We add positive material identification, dimensional and facing checks, visual inspection, and ultrasonic, penetrant, or magnetic particle testing when you specify them. Third-party witnessing has to be written into the PO, as the standard itself requires. Please note that forging quality under B564 means chemistry and surface inspection only, so any extra NDE must be requested.

Sour-service and offshore projects raise a separate point. Table 2 of B564 has no hardness limit, so if the flange will see H2S, the PO must cite NACE MR0175 / ISO 15156 and state the hardness ceiling and the test location. We can supply flanges to that requirement, with hardness reports on each lot, and we will tell you in writing if a heavy section makes the limit difficult to meet. The same goes for impact testing or corrosion testing such as ASTM G28 or G48: these are not part of B564 and must be added by agreement.

A flange does not work alone, so we plan the joint with you. Alloy 625 flanges are often paired with Alloy 625 pipe and fittings, or with Incoloy 825 and Hastelloy C276 flanges in a mixed-alloy system, and bolting, gaskets, and weld procedures all need to match. Our team can supply the flange together with butt-weld fittings, pipe, and stud bolts of compatible alloy with matching heat traceability. For corrosion-resistant overlay or clad alternatives, we can discuss the cost against solid forged Alloy 625 on your drawing.

We serve EPC contractors, fabricators, and distributors in the Middle East, Europe, Southeast Asia, Latin America, and Africa. Flanges are packed with face protectors, wrapped in a moisture barrier, and loaded in plywood crates or pallets, kept apart from carbon steel to prevent iron contamination. To get an accurate quotation, send NPS, class, facing, flange type, grade (1 or 2), quantity, and any NACE or NDE requirement. Our engineers will return a compliance statement, MOQ, and lead time [confirm], and the exact documents you will receive.

4. Specification Table (place directly under the opening paragraph)

Item Detail
Standard ASTM B564-25 / ASME SB-564 (state edition on PO)
Alloy Alloy 625 (Inconel 625), UNS N06625, W.Nr. 2.4856
Product Forged flanges: weld neck, slip-on, blind, lap joint, socket weld
Grade Grade 1 annealed (default); Grade 2 solution annealed
Dimensional standard ASME B16.5 (NPS ½–24), B16.47 for larger sizes [confirm range]
Pressure class 150 to 2500 [confirm]
Facing RF, FF, RTJ
Surface Machined; pickled on request
Documents EN 10204 3.1 MTC: manufacturer’s certification and test report when specified
Inspection PMI, dimensional, visual; UT / PT / MT per PO; SGS / BV / TÜV
Marking Material, B564, heat number, condition

Chemical composition, % (Table 1, N06625): Ni 58.0 min; Cr 20.0–23.0; Mo 8.0–10.0; Nb (Cb) 3.15–4.15; Fe 5.0 max; C 0.10 max; Mn 0.5 max; Si 0.5 max; Al 0.4 max; Ti 0.4 max; P 0.015 max; S 0.015 max.

Mechanical properties (Table 2):

Grade and condition Section size Tensile min, ksi (MPa) Yield 0.2%, min ksi (MPa) Elongation min., %
Grade 1 annealed Up to 4 in. (102 mm) incl. 120 (827) 60 (414) 30
Grade 1 annealed Over 4 to 10 in. (254 mm) incl. 110 (758) 50 (345) 25
Grade 2 solution annealed All sizes 100 (690) 40 (276) 30

Grade 1 is normally used up to 1100°F (593°C); Grade 2 is used above 1100°F where creep and rupture resistance is needed.

5. Market, Industry, and Opportunity SEO Layout

Regions:

  • Middle East: Saudi Arabia, UAE, Qatar, Kuwait, Oman—seawater systems, gas processing, offshore topsides
  • Europe and North Sea: UK, Norway, Netherlands, Germany—subsea and chemical process
  • Southeast Asia: Malaysia, Indonesia, Singapore—refining, FPSO, and LNG
  • Latin America: Brazil pre-salt, Mexico, Argentina—offshore and sour gas
  • Africa: Angola, Nigeria, Egypt—offshore and gas development
  • North America: US Gulf, Canada—replacement flanges and distributor stock
  • Central Asia and India: gas treatment and petrochemical

Industries: offshore oil and gas; sour gas processing; seawater cooling and desalination; flue-gas desulphurization; chemical and petrochemical; LNG; nuclear and aerospace support; waste-to-energy.

Business opportunities and promotion focus:

  1. EPC bid support: flange, fitting, and pipe packages in one alloy with matching heat traceability.
  2. Distributor stock programs for standard classes in Grade 1.
  3. Shutdown and replacement orders: short lead-time requests with tested material.
  4. Special forgings: heavy hubs, large-diameter, and drawing-based forgings under B564.
  5. Content plan: a news page on Grade 1 vs Grade 2 flange selection, plus short LinkedIn posts linking back here.

6. Top 8 FAQ (use on page and in schema)

  1. What is the difference between ASTM B564 and ASME B16.5 for Alloy 625 flanges? B564 sets the material: chemistry, heat treatment, tensile properties, and marking of the forging. ASME B16.5 sets flange dimensions, facing, and pressure-temperature ratings. A complete order names both.
  2. What is the difference between Grade 1 and Grade 2 under B564? Grade 1 is annealed and normally used up to 1100 °F (593 °C). Grade 2 is solution annealed and normally used above that temperature, where creep and rupture resistance is needed. Grade 1 is supplied if the PO does not say otherwise.
  3. What are the minimum mechanical properties for Grade 1 flanges? Up to 4 in. section: 120 ksi tensile, 60 ksi yield, 30% elongation. Over 4 to 10 in.: 110 ksi, 50 ksi, and 25%.
  4. Do B564 Alloy 625 flanges meet NACE MR0175? B564 has no hardness limit. For sour service, state NACE MR0175 / ISO 15156 and the hardness requirement on the PO, and we will supply hardness reports.
  5. Are UT and hydrotest included? Not by default. B564 covers chemistry and surface inspection for forging quality. Flanges are not hydrotested, and UT, PT, or MT are added by purchase-order agreement.
  6. Which documents come with the flanges? An EN 10204 3.1 MTC, the manufacturer’s certification and test report when specified, PMI record, and packing list. SGS, BV, or TÜV inspection is available if stated on the PO.
  7. Is ASME SB-564 the same as ASTM B564? They cover the same alloys and requirements for pressure-vessel code use. State SB-564 when the flange is for ASME code work.
  8. What do you need for a quotation? NPS, pressure class, facing, flange type, grade (1 or 2), quantity, service temperature, and any NACE or NDE requirement.

INQUIRY US

Product Categories

Need a Quote?

Send OD, WT, grade & quantity — get ex-factory pricing within 24 hrs.