Incoloy® 825 CRA Tubing for Sour and Chloride-Bearing Wells — API 5CRA Group 4 | UNS N08825

Incoloy® 825 CRA Tubing for Sour and Chloride-Bearing Wells — API 5CRA Group 4 | UNS N08825

Specification Table

Item Detail
Standard API Spec 5CRA / ISO 13680 (state the edition on the PO)
Group/category Group 4 (21-42-3), UNS N08825, W.Nr. 2.4858
Product form Seamless, cold-worked tubing, casing, liner and coupling stock
Yield grades 110 ksi (110–140), 125 ksi (125–150; PSL-2 window per standard)
Product specification level PSL-1, PSL-2
Outside diameter 2-3/8 in. to 7 in. (60.3–177.8 mm) [confirm]
Wall thickness Per API 5CT / ISO 11960, weight and wall tables
Length R2 / R3 or as specified
End finish Plain end, EUE / NUE, premium thread by licensed shop
Surface Pickled, bare; no coating required
Documents EN 10204 3.1 MTC, NDE report, hydrotest record, PMI log
Inspection UT, eddy-current / flux leakage, hydrotest, drift, PMI, SGS / BV / TÜV
Sour service reference NACE MR0175 / ISO 15156-3 type 4c material
DESCRIPTION

Incoloy 825 CRA tubing is a cold-worked, seamless nickel-iron-chromium tube made to API Spec 5CRA (ISO 13680) as a Group 4 corrosion-resistant alloy for production tubing, casing, liners, and coupling stock. PETROL STEEL LTD. supplies UNS N08825 in the 110 ksi and 125 ksi yield grades to PSL-1 or PSL-2 in outside diameters from 2-3/8 in. to 7 in. (60.3–177.8 mm) with wall thickness following API 5CT / ISO 11960 weight tables [confirm]. Every shipment carries an EN 10204 3.1 mill test certificate and can be inspected by SGS, BV, or TÜV before it leaves the mill.

Most inquiries we receive for this product start from the same place: a completion design that has moved past 13 Cr and duplex because H₂S partial pressure, chloride content, or temperature has crossed the limit those alloys can carry. Alloy 825 sits right after that step. With roughly 38–46% nickel, 19.5–23.5% chromium, 2.5–3.5% molybdenum, and 1.5–3.0% copper, plus titanium to tie up carbon, it keeps an austenitic structure that resists chloride stress corrosion cracking, whereas a ferritic-austenitic duplex tube would not. The copper and molybdenum also give it useful resistance to reducing acids, which matters in wells that see acid stimulation or produced water with organic acids.

The standard separates the material into Group 4 because the metallurgy is different from the stainless groups. API 5CRA fixes chemical composition limits, the required mechanical properties for each yield grade, the manufacturing route, heat treatment and cold-work conditions, dimensional tolerances, the non-destructive examination program, and the marking. For N08825, the tube is delivered cold-worked, not annealed, and that cold work is what produces the strength. In practice, the 110 ksi grade carries a yield window of about 110–140 ksi, a minimum tensile strength near 115 ksi, and a hardness ceiling around 35 HRC, while the 125 ksi grade covers about 125–150 ksi yield, around 130 ksi minimum tensile, and a higher hardness limit. PSL-2 tightens the windows and the testing. Exact limits come from the edition of the standard named in your purchase order, and we quote against that edition, not from memory.

Choosing between the grades is usually a load question, not a corrosion question. Both grades use the same chemistry. The 110 ksi tube is the common choice for production tubing in moderate-depth sour wells and is easier to handle and thread. The 125 ksi tube is selected when tension, burst, or collapse loads push the design factor, typically in deeper or higher-pressure wells. The trade-off is that higher cold work narrows the margin on sulfide stress cracking, so the service limits in NACE MR0175 / ISO 15156-3 for type 4c materials must be checked against the actual temperature, H₂S partial pressure, and chloride level of the well. Your materials engineer owns that decision. We provide the datasheets, test reports, and traceability that go into the file.

A CRA tube is only as good as the quality plan behind it, and this is where suppliers differ most. Our standard scope for N08825 tubing includes heat and product chemical analysis, tensile and hardness testing on the sampling frequency required by the PSL, full-body ultrasonic examination and eddy-current or flux-leakage checks on the outside surface, hydrostatic testing of each length, drift testing, visual and dimensional inspection, and positive material identification on every length at the mill and again on arrival if the buyer requests it. For PSL-2 projects, we also arrange the extra impact, grain-size, and corrosion-test work the purchaser specifies. Documents are issued as a package: 3.1 MTC, NDE reports, hydrotest records, PMI log, heat-treatment and cold-work records, and a packing list tied to the length numbers.

Handling and logistics are the part of CRA procurement that rarely makes it into a spec sheet and causes most field complaints. Nickel alloy tubing must never touch carbon steel racks, chains, or slings, because iron contamination on the surface becomes a pitting site. We ship with plastic-faced or wood dunnage, end protectors on both ends, inhibitor-free dry bundling and clear marking, and we keep CRA lots physically separate from carbon steel in the warehouse. Threading, if required, is done by a licensed premium-connection shop, and we can coordinate that step so that the pin and box compounds and protectors suit CRA service. Bundled lengths are packed for sea freight in export-grade crates or strapped bundles with moisture barrier wrap.

We organize our inquiry handling around the questions procurement teams actually send. A complete request for Incoloy 825 CRA tubing needs six data points: outside diameter, weight per foot or wall thickness, yield grade (110 or 125 ksi), PSL level, length range (R2 or R3), and total quantity. If you also tell us the connection type, whether the material is for tubing or coupling stock, and the expected H₂S, CO₂, and chloride levels, our team can check the request against the standard before quoting and flag any combination that will not pass. That avoids the most common cause of delay in CRA purchasing: a datasheet that is rewritten three times after the order is placed.

We support operators, EPC contractors, and OCTG distributors in the Middle East, the Caspian region, Latin America, West Africa, Southeast Asia, and Europe, where sour-gas development, CO₂ injection, and high-temperature wells keep demand for Group 4 alloys steady. The same N08825 chemistry also appears in our Incoloy 825 seamless and welded pipe, flanges, and fittings for surface facilities, so a project can source its downhole and topside nickel alloy items from one supplier with consistent heat traceability. If your well design calls for a higher alloy, our team can also discuss Inconel 625 and Hastelloy C276 alternatives.

To start, send us your OD, WT, grade, and quantity. A supplier that answers your technical questions before you issue a purchase order is a better partner than one that only sends a price. Our engineers will confirm the standard edition, PSL test plan, packing and delivery schedule, and return a quotation with the documents you will receive at shipment. Send your RFQ to PETROL STEEL CO., LTD, and we will respond with a clear compliance statement, MOQ, and lead time [confirm].

4. Specification Table (place directly under the opening paragraph)

Item Detail
Standard API Spec 5CRA / ISO 13680 (state the edition on the PO)
Group/category Group 4 (21-42-3), UNS N08825, W.Nr. 2.4858
Product form Seamless, cold-worked tubing, casing, liner and coupling stock
Yield grades 110 ksi (110–140), 125 ksi (125–150; PSL-2 window per standard)
Product specification level PSL-1, PSL-2
Outside diameter 2-3/8 in. to 7 in. (60.3–177.8 mm) [confirm]
Wall thickness Per API 5CT / ISO 11960, weight and wall tables
Length R2 / R3 or as specified
End finish Plain end, EUE / NUE, premium thread by licensed shop
Surface Pickled, bare; no coating required
Documents EN 10204 3.1 MTC, NDE report, hydrotest record, PMI log
Inspection UT, eddy-current / flux leakage, hydrotest, drift, PMI, SGS / BV / TÜV
Sour service reference NACE MR0175 / ISO 15156-3 type 4c material

Chemical composition (typical Alloy 825 limits, %): C ≤ 0.05; Mn ≤ 1.0; Si ≤ 0.5; S ≤ 0.03; Cu 1.5–3.0; Fe ≥ 22; Ni 38.0–46.0; Cr 19.5–23.5; Mo 2.5–3.5; Ti 0.6–1.2; Al ≤ 0.2. Confirm against the contracted edition.

Mechanical properties (typical, ambient temperature):

Grade Yield, ksi Tensile min, ksi Elongation min. % Hardness max, HRC
110 ksi 110–140 115 about 11 about 35
125 ksi 125–150 130 about 10 about 37 (PSL-1)

Values are indicative and based on public CRA OCTG datasheets. Final limits follow the edition of API 5CRA on your order.

5. Market, Industry, and Opportunity SEO Layout

Regions (one H2 or sub-block each, with natural place names in the copy):

  • Middle East: Saudi Arabia, UAE, Kuwait, Oman, Qatar—sour gas and high-chloride reservoirs
  • Caspian and Central Asia: Kazakhstan, Azerbaijan—high H₂S fields
  • Latin America: Brazil pre-salt, Argentina, Mexico—CO₂ and chloride-rich wells
  • West Africa and Africa: Angola, Nigeria, Egypt—offshore and gas development
  • Southeast Asia and Australia: Malaysia, Indonesia, Australia—gas and CCS wells
  • Europe and North Sea: UK, Norway, Italy—workover and geothermal wells
  • North America: US Gulf, Canada sour gas—replacement tubing and distributor stock

Industries: upstream oil and gas production tubing; sour-gas completions; CO₂ injection and CCS wells; geothermal brine wells; chemical injection lines and downhole accessories; couplings, crossovers, and pup joints from mother tube.

Business opportunities and promotion focus:

  1. Distributor and OCTG stockist programs: short-length and pup-joint orders for N08825.
  2. EPC and operator tender support: pre-bid datasheets, compliance matrices, sample MTCs.
  3. One-stop nickel-alloy supply: tubing plus pipe, flanges, and fittings of the same alloy under a single traceability system.
  4. CCS and geothermal: a growing set of projects that ask for Group 4 alloys.
  5. Content plan: publish the news page “How to choose between 110 ksi and 125 ksi N08825 tubing” and a downloadable RFQ checklist, then share short, spec-based posts on LinkedIn and Facebook that link back to this page.

6. Top 8 FAQ (use on page and in schema)

  1. What is the difference between Incoloy 825 tubing in the 110 ksi and 125 ksi grades? Both use the same UNS N08825 chemistry. The difference is the amount of cold work, which gives 110–140 ksi yield for the lower grade and 125–150 ksi for the higher one. Choose well loads, then check sour-service limits.
  2. Is UNS N08825 suitable for H₂S service? Yes, within the limits for type 4c materials in NACE MR0175 / ISO 15156-3. The allowed temperature, H₂S partial pressure, and chloride level depend on the condition and strength, so the well data must be checked by the operator’s materials engineer.
  3. Why is N08825 tubing supplied cold-worked and not annealed? Annealed Alloy 825 is too soft for downhole loads. Cold working lifts the yield strength to OCTG levels. The tube is not annealed after cold work.
  4. What is the difference between PSL-1 and PSL-2 in API 5CRA? PSL-2 sets tighter property windows and requires more testing than PSL-1. Many sour-gas projects specify PSL-2. State the level on the purchase order.
  5. Which documents come with each shipment? An EN 10204 3.1 MTC, NDE, and hydrotest report; PMI records; heat-treatment and cold-work records; and a packing list tied to length numbers. Third-party reports from SGS, BV, or TÜV are available on request.
  6. Can PETROL STEEL supply the API Monogram product? Ask us for the current license status of the mill for your size and grade [confirm]. We supply to API 5CRA requirements and will state the license position in writing before you order.
  7. What information do you need for a quotation? OD, wall thickness or weight, yield grade, PSL level, length range, quantity, and connection type. Well conditions (H₂S, CO₂, chlorides, temperature) help us check the request.
  8. How is CRA tubing packed to avoid contamination? With non-ferrous or plastic-faced dunnage, end protectors, separated storage from carbon steel, and moisture-barrier wrapping for sea freight.

INQUIRY US

Product Categories

Need a Quote?

Send OD, WT, grade & quantity — get ex-factory pricing within 24 hrs.